Heavy Haul Transporting Inc.’s Specialized Transport Division has heavy and oversized transportation equipment for all your transportation needs. As one of the nation’s leading heavy haulers, HHT is the best choice.
It’s not uncommon for companies to use the help of a trucking service when they need to transport a large piece of equipment. Construction companies may need to move a large construction crane across state lines.
Similarly, an aerospace company might have to transport a fuselage between their manufacturing facility in one city and an airport hangar in another city.
However, transporting these large items isn’t easy. In fact, it’s illegal for trucking companies to transport oversized loads without a permit. These restrictions were put in place to ensure the safety of drivers, pedestrians, and the roads/highways themselves.
Oversize load trucking companies need to exercise caution due to the many dangers they could encounter during transportation. Here are 3 dangers associated with transporting oversized loads.
It’s no secret that heavy haul shipping is a complex and time-consuming process all on its own. However, it’s important to note that the majority of problems that arise during a heavy haul shipment can be attributed to improper planning that often leads to fulfilment delays, issues in routing, and last-minute delivery updates.
If you aren’t familiar with this mode of shipping, you should know that heavy haul is basically the transportation of heavy commodities that require special handling procedures, permits, and specialized equipment.
To avoid unforeseen complications and delays, here are a few tips you need to keep in mind when you’re dealing with larger shipments.
1. Take the Time to Plan Ahead
Avoid planning the logistics of the shipment at the very last minute. You need to take out just enough time to plan the whole route and take all the relevant factors into consideration in order to avoid hassle and reduce the chances of damages and delays.
Regardless of the type of load, unexpected delays are inevitable in almost all kinds of shipping, but unlike standard carriers that can always pull to a stop to take care of unforeseen complications, heavy haul shippers aren’t as fortunate. This is why you need to be smart and plan for the unexpected.
Delivery items that exceed a certain size or weight are classified as oversized loads. These items need to be carefully transported using the services of an oversized trucking company. However, these deliveries often take longer than one would typically expect.
People that have used the services of oversized trucking companies in the past will tell you that deliveries tend to take a while. These slow delivery times are rarely due to inefficiencies on the part of the trucking company themselves and could be attributed to other hurdles that the delivery organization encounters before and during the delivery process.
Here are some factors that explain why oversized deliveries take so long.
1. Route planning
Delivering an oversized load is no easy feat. Even with the right vehicle, the delivery process still involves a great deal of planning. Once details around the pick-up and delivery locations have been conveyed to the trucking company, a delivery route for the shipment is charted out.
Heavy equipment hauling is a stressful task. It also happens to be time-consuming and expensive. The search for finding such a service can be a challenging task. The company you choose must have a good reputation and complete your job on time. You also don’t want to overspend on equipment hauling, while at the same time, want your heavy equipment to reach its destination safely.
If you are looking for a heavy equipment transport service, then here are the important things to consider. These will help you choose the best service for your business.
1. They Must be Capable for the Job at Hand
The first thing to consider when choosing a heavy equipment hauling service is whether they are capable enough to do the job or not. They should have the equipment and experience necessary to execute the task. They may be perfect in every other way but they are a bad choice if they can’t handle your heavy equipment.
Therefore, before choosing any service for heavy equipment hauling, determine the magnitude of service you need and then start looking for different options.
Over dimensional cargo is defined as cargo that protrudes over the sides of the vehicle transporting them. This often includes oversized objects such as industrial factory components, construction machines, and pre-built homes which are usually transported by truck.
Transporting oversized loads by road can be a challenge for any trucking company. The process requires careful planning and consideration to ensure that the item is being transported legally and does not pose a danger to its surroundings.
Over dimensional trucking is unavoidable in many cases, so here are 3 things to check before transporting an oversized load.
1. Be familiar with trucking regulations for oversized loads
While most states have the same height requirements for cargo (i.e: oversize vehicles shouldn’t be taller than 14’6”), there may be differences in cargo width, length, and weight limits permitted between states.
A heavy haul freight is defined as a transport load that exceeds the size and/or weight restrictions set by the local body that governs roads, such as the state. They are also known as oversized loads.
The conditions for classifying cargo as heavy haul varies from state to state, but it usually implies that the truck, trailer, and cargo have a combined weight exceeding 80,000 pounds and/or width exceeding 8.5 feet and/or height exceeding 14.5 feet. Trucks and trailers whose combined length exceeds 65 feet are also classified as heavy haul freight transporters.
Some cargo loads simply can’t be broken down into smaller sizes, so heavy haul companies are required to transport these oversized freights. Selecting the right heavy haul company for your needs can be tricky if you’re unfamiliar with the process of moving oversized cargo. So here are some things to look out for before choosing the services of a heavy haul company.
Transporting oversized loads can be a project in itself. Large loads are tricky to manage on the road, and will likely run into many challenges along the way. Getting past these challenges quickly is essential to ensure the delivery is completed on time.
Shipping planners should account for the challenges the shipment will encounter beforehand and have a plan of action ready before they can cause delays or problems to the shipment. Here are 3 challenges of oversized shipping:
1. Meet legal requirements
Shipping oversized loads is complicated by the fact that states often differ on their definition of “oversized loads”. What may be considered a normal load in one state could be considered an oversized load in another, so it’s important to get oversized permits for each state your load will be traveling through.
You need to make sure the company has all the equipment needed to handle the task with ease. In this blog post, we’ll take a look at some tips you need to consider when you’re selecting a heavy equipment hauling company.
1. They Should Offer Door to Door Service
The last thing you’d want is for your shipment to be dropped off halfway, which is why you need to look for a heavy haul trucking company that offers door to door service and makes sure that all your equipment is shipped directly to the location of your choice.
Door to door service is beneficial for shipping heavy equipment as it helps you avoid a lot of hidden costs such as import taxes and customs fees, takes away the hassles from your logistics processes, and provides streamlined transportation.
Moving heavy equipment or vehicles from one place to another requires professional help. You cannot just rely on anyone for shipping your valuable and expensive heavy equipment. The shipping company you choose must meet specific criteria and have a reputable presence in its industry.
Here are some important tips that can help you choose the right heavy equipment transport company for your business.
1. Ask Questions
It is important to ask as many questions as you want before choosing any transport company. You must be satisfied with the answers before you go on and let them ship your heavy equipment. Ask them about their experience in the field and if they have shipped any similar heavy equipment as yours in the past.
Shipping through heavy haul trucking is a lengthy procedure that often involves a lot of planning. Attention has to be paid to every little detail, which is why it is necessary to have a checklist and to thoroughly stick to it. Luckily, while some little details can be skipped over, there are others, which are crucial and must never be overlooked.
These main pointers are shipping planning essentials so, even if you only focus on them, the shipping process will be smoother and problem-free.
So, if you want to make the planning process easier for shipping through heavy haul trucking, the following are certain things that you need to look out for: