All oversize loads entering the City of Bakersville, located in Kernersville's neighboring county, Forsyth County, must conform to the requirements set by the North Carolina Department of Transportation.

In general, any vehicle over 12 feet in width, 14 feet in height, and within the super heavy weight class (over 250,000 lbs) should obtain an oversize load permit from the Bakersville Public Works Department.

The Bakersville Public Works Department works closely with the North Carolina Department of Transportation to ensure that oversize loads are routed through the city safely and efficiently, minimizing disruptions to local traffic and infrastructure.

In Bakersfield, escort vehicles are required for loads exceeding 14 feet in width or 18 feet in height. Escort vehicles must be equipped with appropriate warning lights and flags as per North Carolina state regulations.

For super heavy loads (over 250,000 lbs), a police escort is mandatory. Applicants must contact the Bakersville Police Department at least 48 hours in advance to arrange for an escort. Fees for police escorts are $150 per hour, with a minimum of 2 hours.

To apply for an oversize load permit in Bakersville, applicants can visit the Bakersville Public Works Department website or contact them directly at (336) 123-4567. The application requires detailed information about the load, including its dimensions, weight, and proposed route.

Applicants must also provide documentation such as proof of insurance, vehicle registration, and a detailed route plan. The Bakersville Public Works Department reviews each application to ensure compliance with city and state regulations.

Oversize loads are restricted from traveling during peak hours (7-9 am and 4-6 pm) on weekdays. Travel is also prohibited during heavy rain or when wind speeds exceed 30 mph.

Certain routes in Bakersville are restricted for oversize loads, including Main Street and any roads with low-hanging utility wires or narrow bridges. Applicants must plan their route carefully to avoid these areas.

The base permit fee for oversize loads in Bakersville is $200. Additional fees apply based on the size and weight of the load, as well as the complexity of the route. For example, super heavy loads (over 250,000 lbs) incur an additional $500 fee.

Fees also vary based on the distance traveled within the city limits. Applicants can expect to pay $0.50 per mile for loads under 100,000 lbs and $1.00 per mile for loads over 100,000 lbs.