All oversize loads entering Clarksville, Pennsylvania, which is located in Greene County, must conform to the requirements set by the Pennsylvania Department of Transportation (PennDOT).

In general, any vehicle over 12 feet in width, 14 feet in height, and within the heavy haul weight class (over 80,000 lbs) should obtain an oversize load permit from the Greene County Public Works Department, in coordination with the Clarksville authorities.

The permit process ensures that oversized vehicles avoid low bridges, such as the one on State Route 21 near the Clarksville city limits, and take routes that can accommodate their size and weight.

In Clarksville, escort vehicles are required for oversize loads exceeding 16 feet in width or 18 feet in height. Escort vehicles must be equipped with appropriate signage and warning lights as per PennDOT regulations.

For loads that require a police escort, the Clarksville Police Department must be contacted at least 48 hours in advance. The police escort fee is $150 per hour, with a minimum of 2 hours.

To apply for an oversize load permit in Clarksville, applicants must submit their request through the PennDOT Online Permitting System or by contacting the Greene County Public Works Department directly at (724) 852-5271.

Required documentation includes proof of insurance, a detailed route plan, and a description of the load being transported. Applicants must also comply with the Federal Motor Carrier Safety Administration (FMCSA) regulations.

Oversize loads are restricted from traveling during peak hours (7-9 am and 4-6 pm) on weekdays in Clarksville. Travel is also restricted during special events, such as the annual Clarksville Heritage Days festival.

Seasonal restrictions apply during heavy snowfall or flooding events, when certain routes may be closed or restricted. The Clarksville Public Works Department will notify permit holders of any such restrictions.

The standard permit fee for oversize loads in Clarksville is $75, with additional fees based on the complexity of the route and the size of the load. For example, loads exceeding 18 feet in width or 20 feet in height incur an additional $50 fee.

There is also a mileage fee of $0.05 per mile for routes that exceed 50 miles within Clarksville city limits.