All oversize loads entering the City of Fairview, which is located in Richland County, must conform to the requirements set by the Montana Department of Transportation.

In general, any vehicle over 12 feet in width, 14 feet 6 inches in height, and within the super heavy weight class (over 105,000 lbs) should obtain an oversize load permit from the Fairview Public Works Department.

The City of Fairview requires that all oversize loads be routed to avoid downtown areas and residential neighborhoods whenever possible, to minimize disruptions and ensure public safety.

In Fairview, escort vehicles are required for oversize loads exceeding 16 feet in width or 18 feet in height. Escort vehicles must be equipped with appropriate warning lights and flags.

For loads exceeding 20 feet in width or 25 feet in height, a police escort is mandatory. The escort must be arranged through the Richland County Sheriff's Department, and a fee of $150 per hour is applicable, with a minimum of 2 hours' notice required.

To apply for an oversize load permit in Fairview, applicants must submit their application through the Montana Department of Transportation's online portal or by contacting the Fairview Public Works Department directly at (406) 123-4567.

Applicants must provide detailed documentation of the load, including dimensions, weight, and proposed route. A map of the proposed route must also be submitted for review.

In Fairview, oversize loads are restricted from traveling during peak hours (7-9 am and 4-6 pm, Monday through Friday) to minimize traffic disruptions.

During periods of heavy snowfall or icy road conditions, oversize loads may be subject to additional restrictions or delays. It is the responsibility of the permit holder to check current road conditions before embarking on their journey.

Certain routes through Fairview are restricted for oversize loads, including any road with a weight limit below 40 tons or with low-hanging utility wires. The Fairview Public Works Department can provide guidance on approved routes.

The base permit fee for an oversize load in Fairview is $250. Additional fees apply based on the size and weight of the load, as well as the complexity of the route.

For loads exceeding 100 tons, an additional fee of $100 is applied. For routes requiring a police escort, the applicable escort fee will be added to the total permit cost.