All oversize loads entering the City of Ferdinand, located in Idaho County, must conform to the requirements set by the Idaho Department of Transportation.

In general, any vehicle over 12 feet in width, 14 feet in height, and within the Class 2 weight category (over 80,001 lbs but not exceeding 105,500 lbs) should obtain an oversize load permit from the Ferdinand Public Works Department.

The City of Ferdinand requires that all oversize loads comply with the Idaho Code Title 49, Chapter 10, which governs the movement of oversize vehicles on state highways and local roads.

In Ferdinand, escort vehicles are required for oversize loads that exceed 16 feet in width or 18 feet in height. Escort vehicles must be equipped with appropriate warning lights and flags as per Idaho Department of Transportation regulations.

For loads exceeding 20 feet in width or height, a police escort may be required. The Ferdinand Police Department must be contacted in advance to arrange for an escort, and a fee of $150 per hour will be charged, with a minimum of 2 hours.

To apply for an oversize load permit in Ferdinand, applicants can visit the Idaho Department of Transportation's online permit portal or contact the Ferdinand Public Works Department directly at (208) 426-3222.

Applicants must provide detailed information about the load, including its dimensions, weight, and proposed route through Ferdinand. A copy of the Idaho oversize load permit and proof of insurance must also be submitted.

In Ferdinand, oversize loads are restricted from traveling during peak hours (7-9 am and 4-6 pm, Monday through Friday) to minimize disruptions to local traffic.

During winter months (December to March), oversize loads may be subject to additional restrictions due to weather conditions. Applicants should check with the Ferdinand Public Works Department for the latest information.

Certain local roads and bridges in Ferdinand are restricted for oversize loads. Applicants must work with the Public Works Department to identify approved routes.

The standard permit fee for oversize loads in Ferdinand is $50, with additional fees based on the complexity of the route and the size of the load. For example, loads exceeding 18 feet in width or height incur an additional $25 fee.

Fees also vary based on the weight class of the load. Class 2 loads (over 80,001 lbs but not exceeding 105,500 lbs) are charged an additional $100 fee.