All oversize loads entering the City of Kellyton, located in Coosa County, must conform to the requirements set by the Alabama Department of Transportation.

In general, any vehicle over 12 feet in width, 14 feet in height, and within the Class 8 weight category (over 33,001 lbs) should obtain an oversize load permit from the Kellyton Public Works Department.

The Kellyton Public Works Department works closely with the Alabama Department of Transportation to ensure that all oversize loads are safely transported through the city, avoiding major highways like US-231 during peak hours when possible.

In Kellyton, escort vehicles are required for oversize loads exceeding 16 feet in width or 18 feet in height. Escort vehicles must be equipped with proper signage and warning lights as per the Alabama Department of Transportation's guidelines.

For loads that require a police escort, the Kellyton Police Department must be contacted at least 48 hours in advance to schedule the escort. The fee for a police escort is $150 per hour, with a minimum of 2 hours.

To apply for an oversize load permit in Kellyton, applicants can visit the Kellyton Public Works Department's website or contact them directly at (256) 555-1234. The application requires detailed information about the load, including its dimensions, weight, and proposed route.

Applicants must also provide proof of insurance and a valid USDOT number. For loads that exceed certain dimensions, a detailed route survey may be required.

In Kellyton, oversize loads are restricted from traveling during peak hours (7-9 am and 4-6 pm, Monday through Friday) to minimize traffic disruptions.

During extreme weather conditions, such as heavy rain or high winds, oversize loads may be restricted from traveling altogether. It's the responsibility of the permit holder to check the weather forecast before embarking on their journey.

Certain neighborhoods in Kellyton, such as those with narrow streets or low-hanging utility wires, are restricted to oversize loads. Alternative routes must be planned in advance to avoid these areas.

The standard permit fee for oversize loads in Kellyton is $100, with additional fees based on the complexity of the route and the size of the load. For example, loads exceeding 20 feet in width or 25 feet in height incur an additional $200 fee.

There is also a mileage fee of $0.50 per mile for routes that exceed 50 miles within the city limits.