Milford, Delaware regulations require all heavy haul operations to comply with the Delaware Department of Transportation (DEDOT) guidelines as well as local ordinances administered by the Milford Department of Transportation (MILDOT).

Heavy haul permits are required for any load exceeding 11 feet in width, 13 feet 0 inches in height, or 194,708 lbs in gross vehicle weight. These dimensions are strictly enforced throughout Milford, particularly in high-traffic areas.

Special consideration must be given to route planning to avoid Milford Bridge and the vicinity of Milford Valley, which have infrastructure limitations or heavy pedestrian traffic that may impede oversized loads.

Delaware law mandates escort vehicles for any load exceeding 14 feet in width or 13 feet 6 inches in height. When traveling through Milford, these requirements may be more stringent depending on the specific streets and neighborhoods traversed.

The Milford Department of Transportation requires a minimum of 68 hours advance notice to coordinate police escorts, which are mandatory for super-loads or when traveling through congested areas of Milford.

The Delaware Department of Transportation manages the primary application process for oversize permits, with supplementary permits required from Milford Department of Transportation for transit through Milford limits.

Required documentation for Milford permits includes axle configuration diagrams, proof of insurance with appropriate coverage levels, and detailed transport plans. Engineering assessments may be required for loads exceeding standard weight thresholds on certain streets and bridges.

Milford has strict time-of-day restrictions for oversize loads, generally prohibiting movements during peak hours (6-9 am and 4-5 pm, Monday-Friday).

Seasonal restrictions apply during major events like the the Milford Spring Celebration and the the Milford Arts Games, which may impact routing and scheduling.

Certain neighborhoods, such as Milford Center and areas around the Milford Tunnel, have restricted access for oversize loads. Alternative routes should be planned in advance to avoid these areas.

The base permit fee for an oversize load in Delaware is $40, with additional fees for super heavy loads (over 200,000 lbs) ranging from $150 to $350 depending on the complexity of the move.

For movements within Milford, Milford Department of Transportation may charge additional fees for city-specific permits, which can range from $75 to $500 or more for particularly complex routes or those requiring extensive coordination with city agencies.