All oversize loads entering the City of Onaway, Presque Isle County, must conform to the requirements set by the Michigan Department of Transportation (MDOT).

In general, any vehicle over 12 feet in width, 14 feet in height, and within the Class 9 weight category (over 154,000 lbs) should obtain an oversize load permit from the Onaway Public Works Department.

The City of Onaway requires compliance with the Michigan Vehicle Code (MVC) and adheres to the regulations set forth by the MDOT for oversize and overweight vehicles. Additional documentation may be required for loads that exceed specific dimensions or weight limits.

In Onaway, escort vehicles are required for oversize loads that exceed 16 feet in width or 18 feet in height. Escort services must be provided by certified professionals and comply with the Michigan State Police (MSP) regulations.

For loads exceeding 20 feet in width or over 100 feet in length, a police escort may be required. The Onaway Police Department must be contacted in advance to arrange for escort services, and a fee of $100 per hour will be charged, with a minimum of 2 hours.

To apply for an oversize load permit in Onaway, applicants must submit their request through the Michigan Department of Transportation's Permit Office website or by contacting the Onaway Public Works Department directly at (989) 733-8821.

Documentation required includes proof of insurance, detailed load dimensions, and route information. Applicants must also provide a valid Michigan business license and comply with all applicable regulations.

Oversize loads are restricted from traveling during peak hours (7-9 am and 4-6 pm) on weekdays in Onaway.

During winter months (December to March), oversize loads may be subject to additional restrictions due to weather conditions. It is the responsibility of the permit holder to check with the Onaway Public Works Department for up-to-date information.

Certain neighborhoods and local roads, such as those within the Onaway Historic District, are restricted to oversize loads. Permits will specify approved routes.

The standard permit fee for oversize loads in Onaway is $50, with additional fees based on the complexity of the route and load dimensions. For example, loads exceeding 18 feet in width or 120 feet in length incur an additional $25 fee.

There is also a $10 administrative fee for processing the permit application. Fees are subject to change, and the Onaway Public Works Department should be contacted for the most current information.