Heavy Haulers move armored military vehicles with a plan built around size, weight, clearance, and security. Heavy Haulers see these loads arrive through Savannah Inland Port (Greer SC), SC after ocean transit from countries such as Germany, South Korea, Turkey, the United Kingdom, and the United States’ allied defense supply chains. Buyers often include defense contractors, government agencies, training facilities, and private security firms. Different ocean carriers and freight forwarders handle these imports, so the arrival path is not a single source or schedule. Heavy Haulers coordinate road pickup only after the port gate release. Heavy Haulers handle the next step after the vehicle has been crated, coated against corrosion, blocked and tied down on the vessel, inspected on the port side, and staged in a bonded or secured yard while customs clears it. Heavy Haulers then move the cargo by truck, not by sea or rail. Heavy Haulers work with the timing, paperwork, and route checks that oversized military equipment demands.
Heavy Haul Transporting helps businesses coordinate the movement of oversized freight, industrial machinery, construction equipment, and project cargo throughout North America.
Where the heavy cargo comes from at Savannah Inland Port (Greer SC) is usually tied to defense procurement and industrial supply chains that support armored fleets. Tanks and APCs may arrive from NATO partners, European manufacturers, or Asian production lines serving U.S. buyers and allied programs. Some shipments are new-build units, while others are refit vehicles, spare hulls, or training platforms moving through different ocean carriers and freight forwarders before reaching the inland port. The cargo often enters with protective coatings, sealed components, and blocking designed to reduce movement during transit. Once unloaded at the marine terminal network and transferred inland, the vehicle may wait in a secured yard until release. Heavy Haul Transporting steps in only for road transport after that point. Our Team checks axle weight, deck height, turning radius, and local access so the truck can depart cleanly toward I-85, I-26, I-385, and U.S. 29 without wasting time at the gate.
Armored military vehicles are not everyday freight, and that is why the demand matters. These moves support defense readiness, military training, depot transfers, modernization programs, and contractor deliveries across the Southeast and beyond. In South Carolina, the broader industrial base around Greer, Spartanburg, and Greenville creates steady demand for heavy equipment transport, oversized load trucking, and machine movers who understand tight schedules. Heavy Haulers know that a tank or APC can represent a time-sensitive asset tied to a contract milestone or a training window. That means route surveys, permit timing, and escort coordination have to line up before the truck rolls. Heavy Haul Transporting manages these moves with the same attention given to heavy machinery transportation and construction equipment shipping, because the stakes are similar: weight, value, and public-road safety. For shippers, the goal is simple—move the vehicle from the inland port to the next secure destination without delay, damage, or route surprises.
| Highway | Transformer-Specific Notes | Key OD Notes |
|---|---|---|
| No highway data available. | ||
Armored military vehicles require more than a standard flatbed. Depending on the model, weight, and ground clearance, our fleet may use RGNs, lowboys, step decks, double drops, or multi-axle trailers. Tanks usually sit best on a lowboy or multi-axle setup because the deck height helps with bridge clearance and overhead restrictions. APCs may fit on an RGN or step deck when dimensions allow, but axle count and load distribution still matter. Heavy Haulers plan around track width, center of gravity, and tie-down points so the vehicle stays stable during transport. Ramps, removable goosenecks, and spread-axle configurations can help with loading geometry once the cargo is released. Heavy Haul Transporting also reviews route geometry before dispatch, because a large turret profile or long wheelbase can change how a load clears turns, medians, and construction zones. That is why trailer selection is not guesswork; it is part of the haul plan from the start.
South Carolina oversize permits are a core part of these moves, and they depend on exact measurements, axle weights, and travel windows. For armored military vehicles, route planning often includes bridge clearances, lane widths, roadway shoulders, and any local restrictions near Greer. Major corridors such as I-85, I-26, I-385, and U.S. 29 can support heavy haul trucking, but each route still needs review for construction zones, merge lanes, and height constraints. Depending on the load, escort vehicles may be required, along with daylight travel limits or restricted movement times. Heavy Haulers coordinate route surveys so the truck avoids low wires, tight ramps, and weight-sensitive structures. Heavy Haul Transporting also checks whether the load needs over-dimensional hauling permits or additional state review before departure. These details matter because a tank or APC is not just oversized freight; it is a high-value military asset that must move under a documented, legal, and practical road plan.
| Permit type | TxDOT Superload |
| Width trigger | Over 14 ft wide |
| Height trigger | Over 18 ft tall |
| Engineering study | Required over 16 ft wide |
| Processing time | 10–14 business days |
| FHWA notification | Required over 16 ft wide |
| Permit type | TxDOT Superload |
| Width trigger | Over 14 ft wide |
| Height trigger | Over 18 ft tall |
| Engineering study | Required over 16 ft wide |
| Processing time | 10–14 business days |
| FHWA notification | Required over 16 ft wide |
Heavy Haul Transporting provides over-the-road trucking for armored military vehicles after they leave the port gate. We do not handle loading or unloading at the terminal, and we do not provide customs brokerage, warehousing, ocean freight, or freight forwarding. Our job starts when the vehicle is ready for pickup and the route is approved. Heavy Haul Transporting dispatches the right tractor and trailer combination, confirms permit status, and keeps the move aligned with the destination schedule. Our Team handles oversized load trucking across South Carolina and nationwide, including long haul trucking for military buyers, contractors, and government-related shipments. We also coordinate with escorts, route checks, and secure tie-down requirements so the cargo stays controlled in transit. Heavy Haul Transporting works with flatbed transportation companies, heavy haul truck companies, and heavy equipment haulers standards, but our focus stays on road transport only. That keeps the process direct, legal, and built around the actual dimensions of the armored vehicle.
China
View DetailsGermany
View DetailsIndia
View DetailsSouth Korea
View DetailsJapan
View DetailsYes. We handle over-the-road trucking only after the cargo leaves the port gate. We do not load, unload, warehouse, broker customs, or move freight by ocean. Our role is to transport armored military vehicles by truck from the inland port to the next secure destination.
Depending on the vehicle’s weight and dimensions, we may use RGNs, lowboys, step decks, double drops, or multi-axle trailers. The choice depends on axle loading, ground clearance, turret height, and route limits. Each move is matched to the load, not the other way around.
Usually yes. Tanks and APCs often trigger oversize or overweight rules, which means permits, possible escorts, and route review. We verify dimensions, axle weights, travel windows, and bridge clearances before dispatch so the move stays legal on South Carolina roads.
Route planning helps avoid low bridges, narrow ramps, construction detours, and weight-restricted structures. In the Greer area, access to I-85, I-26, I-385, and U.S. 29 can be useful, but every load still needs a measured route survey and permit review.
No. Customs brokerage and port administration are outside our service. We wait for release, then take over the road transport portion. That keeps the process focused on trucking, permits, escorts, and safe movement from the inland port to the destination.
Typical buyers include defense contractors, military agencies, training centers, and private security organizations. Some shipments are new production units, while others are refit vehicles or transfer assets. The common factor is that the cargo is heavy, oversized, and time-sensitive.
Yes. Our fleet handles long haul trucking across the United States. Once the armored vehicle is released at Savannah Inland Port (Greer SC), SC, we can move it to bases, depots, contractors, and secure facilities in other states using the proper trailer and permit setup.